How To Adjust The Band Of A Replica Rolex Submariner

All over the world Rolex brand watches are well known and respected too and have spawned many copies. Well, replica watches range in quality and it is difficult to explain how to adjust all types of bands that they may utilize, but the two major types will be either pin or screw based and each of these require a few tools and careful instruction, but are very much user serviceable. You can even check out more all the details online. For now just follow these steps:

1.First examine the links closest to the buckle of the watch, because if the links contain screws, skip to the screw based band section and if they are simple holes with a tiny pin inside of them, continue to step 2.

2.Then, place the watch face down on the soft cloth, to prevent scratching the watch

3.After that locate the small arrows engraved on the inside of the watch band. This will actually show the proper direction to push the pins out of the band. Then place the driving tool into the hole, opposite of the arrow and push out the pin in the pointed direction.

4.Then attach the remaining links to the buckle by reversing the earlier process. Slowly, push the link back into the band in the opposite direction against the arrow. This will keep the pin intact.

5.Place the watch face down on the soft cloth and locate the links near the buckle, containing the linking screws. These are found on the sides of the links.

6.Unscrew these links with the small screwdriver; pull the screw and any other tube attached out of the link.

7.Repeat step 3 to remove all needed links, rejoin the band all together.

No votes yet.
Please wait...
shares
%d bloggers like this: